Electric Ducted Fans Plans (Limited kits available)

Messerschmitt Me262 swallow

This model has a 50" wing span and has an all up weight, with a 11.1v 3700mah Lipo flight pack, of only 3.5lbs .  The model is designed for 16/15/3 MEGA motors in Wemotec mini 480 fan units, and Li-Po flight power packs.

All the hardware is available from any good Model retailer

The Kit includes:

Best quality Drawings 

All bulkheads, ribs and main spars are all laser cut, Vacformed, canopy. All Balsa, selected for each task. 1/64" Plywood ducting.  Hardware part. Pictorial instructions. 

Also Available separately:

Plotted Plans 

Vacformed canopy.

Laser cut parts available from BELAIR.

Hardware part.

Pictorial instructions.

Gloster Meteor semi kit

The model will have a 50" wing span and an all up weight, with a 11.1v 3700mah Lipo flight pack, of only 3.5lbs .  The model is designed for 16/15/3 MEGA motors in AirPower 70mm fan units, and Li-Po flight power packs.

All the hardware is available from any good Model retailer

Available soon:

Plotted Plans 

Vacformed canopy.

Laser cut parts available from BELAIR.

Hardware part.

Pictorial instructions.

No Image

De Havilland DH110 Sea Vixen Semi Kit

The model will have a 50" wing span and an all up weight, with a 14.8v 4200mah Lipo flight pack, of only 5.5lbs .  The model is designed for 3700KV motors in AirPower 70mm fan units, and Li-Po flight power packs.

All the hardware is available from any good Model retailer

Available soon:

Plotted Plans 

Vacformed canopy.

Laser cut parts available from BELAIR.

Hardware part.

Pictorial instructions.

No Image

Details

The models have the PN Designs hallmark of construction, the  successful egg box method which alleviates any building anomalies.

The construction is built on a 1/8" Liteply keel with 1/16" birch ply main formers. Standard formers are 3/32" balsa and wing, tail and fin ribs are from 1/16" balsa.  The fuse is skinned in 3/32", sanded down to 1/16" and wings skins are 1/16" balsa, The tailplane and fin skins are made from 1/32" balsa.